West Coast Office
710 13th Street, suite 217
San Diego CA, 92101
Contact:
404-585-8529
IMG_4820.jpeg
VF1

VF1 

The VF1 is a flame effect that adjusts to attach to the yoke of an LED fixture turning a standard light into a VaporFlame effect fixture.  Our quietest fixture, the VF1 can create a range of effects from a low 3 inch flicker to a 3 foot torch “flame”, and can be mounted at any angle. 

 

No heat or flammable material makes the VaporFlame safe to use in close proximity to artists, gear, and scenic pieces.  

 

The VF1 takes 2 channels of DMX, for individual control of the air and water output.  Adjustment dials allow the user to control the fullness of the flame from the unit, creating the most realistic fake flame available.

 

Connected to any potable water line and air supply, the VF1 consumes only 1/8th gallon of water per hour and 0.3 cfm of air. 

IMG_4822.jpeg
VF6

VF6

The VF6 is a flame effect that attaches to the standard 7.5 inch gel frame slot on an LED Leko or Par, fixture turning a standard light into a VaporFlame effect fixture.  Our most versatile fixture, the VF6 can create a range of effects from a low 5 inch flame to a 5 foot blaze, and can be mounted at any angle. 

 

No heat or flammable material makes the VaporFlame safe to use in close proximity to artists, gear, and scenic pieces.  

 

The VF6 takes 2 channels of DMX, for individual control of the air and water output.  Adjustment dials allow the user to control the fullness of the flame from the unit, creating the most realistic fake flame available.  

 

Connected to any potable water line and air supply, the VF6 consumes only 1/4th gallon of water per hour and 1 cfm of air. VaporFlame fixtures atomize their vapor plumes so as not to collect on gear or surfaces.  

IMG_4822.jpeg
VF8

VF8 

The VF8 is a flame effect that to the standard 7.5 inch gel frame slot on an LED Leko or Par, turning a standard light into a VaporFlame effect fixture.  Our most impressive fixture, the VF8 can create a range of effects from a 10 inch fire to a 10 foot blast, and can be mounted at any angle. 

 

No heat or flammable material makes the VaporFlame safe to use in close proximity to artists, gear, and scenic pieces.  

The VF8 takes 2 channels of DMX, for individual control of the air and water output.  Adjustment dials allow the user to control the fullness of the flame from the unit, creating the most realistic fake flame available.

 

Connected to any potable water line and air supply, the VF8 consumes 1 gallon of water per hour and 9 cfm of air.